TESCON SPRIMER
Installation steps
1. Prepare the subsurface
Brush off or wipe down the subsurface, if necessary.
1. Prepare the subsurface
Brush off or wipe down the subsurface, if necessary.
2. Prepare the can of primer
Shake the can vigorously for at least 20 seconds.
2. Prepare the can of primer
Shake the can vigorously for at least 20 seconds.
3a. Apply the primer
Spray TESCON SPRIMER from a distance of approx. 20 cm (8") to the surface (e.g. wood-fibre, concrete or old timber) to form a seamless coating.
3a. Apply the primer
Spray TESCON SPRIMER from a distance of approx. 20 cm (8") to the surface (e.g. wood-fibre, concrete or old timber) to form a seamless coating.
3b. Apply the primer
Spray TESCON SPRIMER from a distance of approx. 20 cm (8") to the surface to form a seamless coating.
3b. Apply the primer
Spray TESCON SPRIMER from a distance of approx. 20 cm (8") to the surface to form a seamless coating.
4. Turning the jet direction
The spray jet can be adjusted in the vertical or horizontal directions to suit the application situation.
4. Turning the jet direction
The spray jet can be adjusted in the vertical or horizontal directions to suit the application situation.
5. Application of tapes
The pro clima adhesive tapes TESCON or CONTEGA, for example, can be stuck onto surfaces treated with primer without any waiting period.
5. Application of tapes
The pro clima adhesive tapes TESCON or CONTEGA, for example, can be stuck onto surfaces treated with primer without any waiting period.
6. Final adhesive strength
The adhesive joint achieves its high final level of strength once the primer has dried fully.
6. Final adhesive strength
The adhesive joint achieves its high final level of strength once the primer has dried fully.